My other hobby filling time in isolation. Finished page 8.
Moderator: Contaminated
- b33fy
- Posts: 6325
- Joined: Sat Mar 31, 2012 11:40 am
- Location: Tonbridge
- Contact:
Re: My other hobby filling time in isolation.
Brilliant work as always Duncan.
Power.. small nail, fast hammer, Torque.. small nail, big hammer.. I got a big hammer
- Wingco
- Posts: 2760
- Joined: Thu Jul 26, 2012 9:49 am
- Location: Swanley, Kent
- Contact:
Re: My other hobby filling time in isolation.
wow, that's very impressive Duncan, they look exceptionally good. What wood will you use for the handle ? if your using wood that is ?
Mirror, Signal go faster pedal !!
- ChrisL
- Posts: 1799
- Joined: Wed Jun 15, 2011 9:42 pm
- Location: Bedfordshire
- Contact:
Re: My other hobby filling time in isolation.
Thanks for taking the time to document the process, the blades look really good now, can't imagine how good they look when polished
Edit to say I've just had a look at the website, some amazing pieces there esp the kukri
Edit to say I've just had a look at the website, some amazing pieces there esp the kukri
Yes I've been drinking, what of it!!
- DJ.
- Posts: 6000
- Joined: Mon May 30, 2011 7:31 pm
- Contact:
Re: My other hobby filling time in isolation.
Thanks
I've just been discussing that with my wife. I think I will use wood, but I'm not sure if I should use the same wood on both knives or different.
I had a rummage in my wardrobe and found:
Maple (too plain, byt nice to work)
Yew (poisonous so maybe not)
Bocote (Mexican rosewood)
Zebrano
Honduras walnut
American black walnut
And a couple of antler tips
Choices...choices....
Wingco wrote:wow, that's very impressive Duncan, they look exceptionally good. What wood will you use for the handle ? if your using wood that is ?
I've just been discussing that with my wife. I think I will use wood, but I'm not sure if I should use the same wood on both knives or different.
I had a rummage in my wardrobe and found:
Maple (too plain, byt nice to work)
Yew (poisonous so maybe not)
Bocote (Mexican rosewood)
Zebrano
Honduras walnut
American black walnut
And a couple of antler tips
Choices...choices....
- nelmo
- Posts: 514
- Joined: Sat Aug 29, 2015 1:25 pm
- Location: Reigate, Surrey
- Contact:
Re: My other hobby filling time in isolation.
That is one weird wardrobe
My build blog: http://zerolifebuild.blogspot.co.uk
- locost220
- Posts: 4490
- Joined: Sat Mar 13, 2010 7:31 pm
- Location: Lewisham South London
- Contact:
Re: My other hobby filling time in isolation.
nelmo wrote:That is one weird wardrobe
'Rising Damp' me thinks
Locost book chassis, Undergoing testing post rebuild
Robin Hood 2B, keeping me sane
Sylva Leader, stuck to the trailer
Robin Hood 2B, keeping me sane
Sylva Leader, stuck to the trailer
- Weathers
- Posts: 1024
- Joined: Thu Nov 17, 2016 2:32 pm
- Contact:
Re: My other hobby filling time in isolation.
nelmo wrote:That is one weird wardrobe
I was going to say “interesting” or “different” or “a little strange”.
Most of us just have heated jackets!!!
-
- Site Admin
- Posts: 10185
- Joined: Thu Dec 03, 2009 10:34 am
- Contact:
Re: My other hobby filling time in isolation.
thx for sharing this Duncan, loving 'the read'......
- DJ.
- Posts: 6000
- Joined: Mon May 30, 2011 7:31 pm
- Contact:
Re: My other hobby filling time in isolation.
Time for an update, sorry for the delay, but I got sidetracked making mirror mounts
After a lot of elbow grease, I have polished both blades. It is always tricky photographing highly polished steel as you get everything in the room, the camera and the photographer relected in the blade . The best way I have found is to take the photos outside:
They certainly aren't perfect, if you look closely there are some slight flaws in the steel, but overall I am happy with the way they are progressing. The obvious notch in the edge of the upper knife in the top photo will be removed when I sharpen them. Obviously, sharpening before the handles are made makes life rather dangerous
I'll be getting on with making the handles in the next few days.
After a lot of elbow grease, I have polished both blades. It is always tricky photographing highly polished steel as you get everything in the room, the camera and the photographer relected in the blade . The best way I have found is to take the photos outside:
They certainly aren't perfect, if you look closely there are some slight flaws in the steel, but overall I am happy with the way they are progressing. The obvious notch in the edge of the upper knife in the top photo will be removed when I sharpen them. Obviously, sharpening before the handles are made makes life rather dangerous
I'll be getting on with making the handles in the next few days.
- b33fy
- Posts: 6325
- Joined: Sat Mar 31, 2012 11:40 am
- Location: Tonbridge
- Contact:
Re: My other hobby filling time in isolation.
Stunning work Duncan, the imperfections add to the character and patina. A superb gift they will be delighted with.
Power.. small nail, fast hammer, Torque.. small nail, big hammer.. I got a big hammer
Return to “General Discussion - Non Car Related”
Who is online
Users browsing this forum: No registered users and 15 guests