Page 1 of 3

Wheels/tyres/ and bits

Posted: Mon Aug 27, 2012 12:43 pm
by CRAIGR
5 Off 6x13 minilite style wheels with 175/55/13 Avon cr500's on .Tyres look old but have good tread probably ok for a few trackdays. 2 of the rims are superlites the other 3 have no markings on. Believe they are all et23 ford fitting. £150 collected from Eastbourne SOLD!!!

Set of 4 compomotive ms rims 2 7x13et-7 and 2 6x13et32 £150
Image

Pair of seat runners (for one seat only) £15
Image

Pair of Michelin 23/57/13 wets £18 the pair

Fury rollbar (new from when BGH had the fury.) but believe the feet need rewelding as slightly wrong angle £40

Westfield number plate holder with plate backing and light £15

ImageRover v8 inlet manifold modified with 3ltr capri carb fitted. £70

Fuel filler cap with integral neck (Old school Cobra flip up style) £10
Image

More stuff to come as i find it

Re: Wheels/tyres/harness and bits

Posted: Mon Aug 27, 2012 5:50 pm
by Fury1630
Hi, are the Minilites off a Fury? I did work out all the offsets I needed but my scribblings are at work, I'd like a set for my Fury-with-doors.

For readers not au-fait with the intricassies of Furyology the Fury Spyder has no doors but wider rear arches. :ugeek:

Re: Wheels/tyres/harness and bits

Posted: Mon Aug 27, 2012 7:50 pm
by greenwoo
Craig....is the sabelt black? and aero style? looking for oen as described with the clip type of fixings....if its llike that i'll take that pls mate

chrs
mark

Re: Wheels/tyres/harness and bits

Posted: Mon Aug 27, 2012 7:58 pm
by CRAIGR
Pm'd you Mark
Heres a pic of the harness.

Image

Re: Wheels/tyres/harness and bits

Posted: Tue Aug 28, 2012 4:41 pm
by CRAIGR
Would have thought they'd fit a fury fine.
Fury1630 wrote:Hi, are the Minilites off a Fury? I did work out all the offsets I needed but my scribblings are at work, I'd like a set for my Fury-with-doors.

For readers not au-fait with the intricassies of Furyology the Fury Spyder has no doors but wider rear arches. :ugeek:

Re: Wheels/tyres/harness and bits

Posted: Wed Aug 29, 2012 5:10 pm
by CRAIGR
Boing

Re: Wheels/tyres/harness and bits

Posted: Sat Sep 01, 2012 6:05 pm
by CRAIGR
bttt

Re: Wheels/tyres/harness and bits

Posted: Mon Sep 03, 2012 5:14 pm
by CRAIGR
Pics of compomotive wheels
Pic of two of the four compomotives
Image

Re: Wheels/tyres/harness and bits

Posted: Sun Sep 09, 2012 4:03 pm
by CRAIGR
Boing

Re: Wheels/tyres/harness and bits

Posted: Mon Sep 10, 2012 7:59 pm
by Teranchelope
Craig,
I could do with the westfield number plate thingy as it's about the only 'bit' I have yet to source for my 'self build'.
I have a light already but maybe the westfield is a bit nicer.
How can I pay you?

Richard