wanted 32/36 Dgav carbs and manifold

[Pmor]

I'm after some 32/36 Dgav or dgv Carburretors to fit a 2litre pinto engine preferably with throttle linkages.
If i get hold of these i will then have some Weber 40DCOE 18's for sale , please see my previous post under wanted for more pictures and details.
many thanks in advance

[pekwah1]

I have a 32/36 twin choke carb. It's either a DGV or DGAV but not sure which, not sure what it's jetted for either to be honest but think it came off a 2.0 pinto.

[Pmor]

Thanks for getting back to me. Do you know if it has the throttle linkage attached?
What money are you looking for.?

[Tony C]

There's a place near me in Horsham that deals in old Fords, they might be worth a try; http://www.escorttec.co.uk/ContactUs.html

[pekwah1]

hi,
sorry thought i put a price, looking for £30.
In terms of throttle linkage, are you after the throttle cable? i only have a dodgy hacked up cable that i made, i think i may have another but i'll have to check. Let me have a look in the garage today and i'll put some pics up for you.

[Martin S]

had a chat with ashton motors today about your carb issues, there answer was are you sure its not tghe idle valves?also if you change to a single carb be carefull not to starve the engine on air,deppending wot head work has been done cheers martin

[Pmor]

hello .
Sounds of interest , does it come with the manifold?
Not worried about cable just need the linkage to be intact, the pivot arm that takes the cable.
Whereabouts would i need to pick it up from?
My email is [email protected] if you want to send pics.
Thanks in advance.
Pete

[Pmor]

Thanks Martin for asking AShton about the issue, I will let the guy at BD engineering see if he can do anything with it, I'll get some standard carbs and then i have these if necessary.