OK
QUestion
My aluminium dash is <5mm
So the IVA want a 19mm trim to the lower edge, passenger side only
Just been looking through Woolies and CBS and can't find anything
Can anyone point me in the right direction?
Thanks
Ashley
Dashboard lower edge 19mm foam IVA
Moderator: Contaminated
-
- Posts: 87
- Joined: Fri Feb 20, 2015 11:35 am
- Contact:
-
- Posts: 1353
- Joined: Sun Aug 12, 2012 7:41 pm
- Contact:
Re: Dashboard lower edge 19mm foam IVA
Ashley, try Europaspares they do various different trims.
One is one too many and one too many is never enough.
- kirmodawn1
- Posts: 491
- Joined: Mon Oct 06, 2014 8:06 pm
- Contact:
Re: Dashboard lower edge 19mm foam IVA
How about pipe lagging although not sure they would consider it permanent
Bob
Bob
Quantum 2+2 Zetec Turbo
- Teranchelope
- Posts: 48
- Joined: Thu Aug 09, 2012 10:31 pm
- Location: Pulborough West Sussex
- Contact:
Re: Dashboard lower edge 19mm foam IVA
I used pipe lagging and smeared it over with silicon sealant. It passed IVA okay.
Will take it off when I rebuild my dash...soon...?
Cheap and free! If you know a plumber.
Will take it off when I rebuild my dash...soon...?
Cheap and free! If you know a plumber.
- Fury1630
- Posts: 5342
- Joined: Thu Mar 04, 2010 7:11 am
- Location: Camberley
- Contact:
Re: Dashboard lower edge 19mm foam IVA
I dressed the lower edge round a pipe, if the lower edge of the dash is bolted to something, get some drain pipe & cut a chunk up (so there's 3/4 of the circle left) & sandwich one edge between the dash & what it's attaching to.
Rickman Ranger
Fisher Fury
Quantum 2+
SSC Stylus
http://blatterbeast.blogspot.com/
http://www.pistonheads.com/regulars/ph-carpool/fisher-fury-ph-carpool/31848
Fisher Fury
Quantum 2+
SSC Stylus
http://blatterbeast.blogspot.com/
http://www.pistonheads.com/regulars/ph-carpool/fisher-fury-ph-carpool/31848
-
- Posts: 87
- Joined: Fri Feb 20, 2015 11:35 am
- Contact:
Re: Dashboard lower edge 19mm foam IVA
kirmodawn1 wrote:How about pipe lagging although not sure they would consider it permanent
Bob
He did say to me in the test, "if you think pipe lagging will do, think again"!
-
- Posts: 87
- Joined: Fri Feb 20, 2015 11:35 am
- Contact:
Re: Dashboard lower edge 19mm foam IVA
AshleyO wrote:OK
QUestion
My aluminium dash is <5mm
So the IVA want a 19mm trim to the lower edge, passenger side only
Just been looking through Woolies and CBS and can't find anything
Can anyone point me in the right direction?
Thanks
Ashley
Telecon (to check if there was a way) with a very kind lady at WOOLIES http://www.woolies-trim.co.uk/p-1440-se ... strip.aspx
SORTED!!!!
Return to “Useful Info - tips, tricks ....”
Who is online
Users browsing this forum: No registered users and 4 guests