Bike carbs woes

[locost220]

Not yet Colin, going to have a play myself first.

[Gazzawesty15]

Maybe late to the party
But my issue with my Keihin was the O rings on the float valve housing with the float needle seating and the O ring on the housing letting by filling the manifold..

Also the silicon rubber manifold rubbers do leak after a little while and I have changed them to a different material ( Rubber petrol pipe)

Also running at 2.5 PSI fuel pressure with 1.8mm main 45 pilot and half a screw out on the mix screw..

2.0 litre zetec fast raod cams 40mm keihin weber management.


Drop me a note if you want any more info..

Gazz

[locost220]

All info noted Gazz

[Rob E]

Good luck with it rich, not long to go