Eastbourne help needed

[S1502]

Having big isssues with my car and running out of ideas. Currently wont start it turns over but wont fire. Doesnt sound like my fuel pump is engagaing wondered if anyone is local to Eastbourne and fancied giving me a hand working it out would be massively appreciated.

Thanks

[greenwoo]

Sam, maybe you can give a bit more detail about the engine/set up in case
a/ you can pick up some pointers remotely
b/ so that if there's anyone relatively close that they would have an idea whether they can help with 'that' type of engine/management etc

[S1502]

Running a silvertop injected zetec on a mondeo ecu. Wiring loom is also from a mondeo.

Thanks

[DJ.]

I'm in Eastbourne and willing to try and help

I am not an expert on silver tops or Mondeo management, but might see something you've missed.

Have sent a pm with my phone number.

[Martin S]

I will pop down if the kettle is on....martin

[S1502]

Best i can do is a can of coke or a flask of tea

[S1502]

Right guys have isolated it down to the fuel pump. I have tested the pump itself and run it directly off the battery and its working fine. So i have a wiring issue. I have tested the feeds and i have my fuel level showing correctly but i have no power to prime the pump when ignition is engaged. How would someone recomend finding the issue does it sound like a relay or something else? Having trouble to trace the wires if im honest.

[Tony T]

Have you got an impact switch that's triggerd and shut the pump of

[SJLB]

I agree with Tony, check if you have an inertia cut out switch. Mine's at the back of the car between the fuel tank and the fibreglass body but it could be anywhere I guess. It looks like a relay, usually with a rubber case, you won't know it's a switch until you press it and hopefully hear a click. And check the fuses too if you haven't already.

[S1502]

Will get hunting for one tomorrow. Needle and haystack springs to mind i hate electrics