Following on from Brands it was discovered that I need a better Breathable oil catch tank......
Can anyone recommend a good one? Only needs to be small capacity.
Thanks
Oil Catch Tanks
Moderator: Contaminated
-
- Posts: 17
- Joined: Sun Jul 24, 2016 4:28 am
- Contact:
Re: Oil Catch Tanks
Must admit, my catch tank is a modified cocktail shaker with a removable top.
-
- Posts: 7147
- Joined: Fri Mar 12, 2010 1:51 pm
- Location: Tonbridge
- Contact:
- graham b
- Posts: 4489
- Joined: Tue Dec 21, 2010 7:49 am
- Location: worthing , west sussex
- Contact:
Re: Oil Catch Tanks
Mocal on ebay.
Or just search oil catch tank on ebay for cheap versions
Or just search oil catch tank on ebay for cheap versions
graham b
Lotus elise
Supercharged.
BBR Mx5
caterham R300
Westfield seiw
Tiger e1
Lotus elise
Supercharged.
BBR Mx5
caterham R300
Westfield seiw
Tiger e1
- Tony B
- Site Admin
- Posts: 6333
- Joined: Sat Feb 20, 2010 1:57 pm
- Location: Maresfield, East Sussex
- Contact:
Re: Oil Catch Tanks
Nick Slater wrote:Must admit, my catch tank is a modified cocktail shaker with a removable top.
Good man, mine is a thermoflask from millets, the screw in top was just right to drill and put a pipe in and i baffled it by filling it with wire wool

- steve m
- Posts: 2891
- Joined: Mon May 09, 2011 9:01 pm
- Location: Crawley West sussex
- Contact:
Re: Oil Catch Tanks
Mine for the water over flow and oil catch, is a poundland push bike drink container
cost £1 each, surprisingly
cost £1 each, surprisingly
Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at
- Weathers
- Posts: 1024
- Joined: Thu Nov 17, 2016 2:32 pm
- Contact:
Re: Oil Catch Tanks
Interestingly on closer inspection I think all it needs is a breather filter as there is a hole in the top which is threaded and looks to take a 5mm screw (measured roughly just now but not tried a M5 screw yet).
Breather filters are 10 a penny just need to find the appropriate adaptor. One end needs a screw in bit about 5mm (for the top of the tank) and the other needs to be able to have a pipe from the filter on it and clamped (10mm ID pipe).
I think that would work? I know what I mean......
Breather filters are 10 a penny just need to find the appropriate adaptor. One end needs a screw in bit about 5mm (for the top of the tank) and the other needs to be able to have a pipe from the filter on it and clamped (10mm ID pipe).
I think that would work? I know what I mean......
Return to “Car Related Discussion”
Who is online
Users browsing this forum: No registered users and 21 guests