how do?

Need help from a fellow owner, something to air - discuss away!

Moderator: Contaminated

Post Reply
Jay
Posts: 617
Joined: Sun Oct 14, 2012 6:25 pm
Contact:
Contact Jay

Re: how do?

Postby Jay » Wed Apr 12, 2017 8:43 pm

K as its an inner joint it cant be failed on the mot as its behind the gaitor. If you cant see it you can fail it so it comes under a non related component
Top
User avatar
graham b
Posts: 4489
Joined: Tue Dec 21, 2010 7:49 am
Location: worthing , west sussex
Contact:
Contact graham b

Re: how do?

Postby graham b » Wed Apr 12, 2017 8:45 pm

Jay..don't tell him that
You will spoil his fun :D
graham b
Lotus elise
Supercharged.
BBR Mx5
caterham R300
Westfield seiw
Tiger e1
Top
User avatar
steve m
Posts: 2891
Joined: Mon May 09, 2011 9:01 pm
Location: Crawley West sussex
Contact:
Contact steve m

Re: how do?

Postby steve m » Thu Apr 13, 2017 6:18 am

Jay wrote:K as its an inner joint it cant be failed on the mot as its behind the gaitor. If you cant see it you can fail it so it comes under a non related component


That's an interesting point Jay, as I have had a car fail its mot on a worn steering rack before, SD1 rover, so that's how long ago, I

steve
Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at
Top
Jay
Posts: 617
Joined: Sun Oct 14, 2012 6:25 pm
Contact:
Contact Jay

Re: how do?

Postby Jay » Thu Apr 13, 2017 9:17 am

The only to fail them is exsesive steering wheel free play that has to be measured from centre point which is 13mm each way of centre point but that is a failiure of its own so still not directley that as they cant be failed directlet
Top
kenton
Posts: 2123
Joined: Mon Mar 01, 2010 7:38 pm
Contact:
Contact kenton

Re: how do?

Postby kenton » Thu Apr 13, 2017 9:31 am

Fixed.
Drilled the pin out, slackened off the lock nut and nipped up the ball joint. No play at all so job done.
Thanks chaps
K
Top
User avatar
andyf
Posts: 1239
Joined: Mon Feb 16, 2015 12:48 pm
Location: Yateley, Hampshire
Contact:
Contact andyf

Re: how do?

Postby andyf » Thu Apr 13, 2017 10:10 am

Jay wrote:The only to fail them is exsesive steering wheel free play that has to be measured from centre point which is 13mm each way of centre point but that is a failiure of its own so still not directley that as they cant be failed directlet

Wow, an inch of free play seems like quite a lot!
MkII Marlin Roadster with Ford 2.0L Pinto and Type 9 gearbox. Going for the oily rag restoration look :-)
Top
Jay
Posts: 617
Joined: Sun Oct 14, 2012 6:25 pm
Contact:
Contact Jay

Re: how do?

Postby Jay » Thu Apr 13, 2017 5:32 pm

Mot is only minimum standards. Thats for rack and pinion. Think its something like 22mm for a steering box.
Top
User avatar
steve m
Posts: 2891
Joined: Mon May 09, 2011 9:01 pm
Location: Crawley West sussex
Contact:
Contact steve m

Re: how do?

Postby steve m » Thu Apr 13, 2017 8:20 pm

kenton wrote:Fixed.
Drilled the pin out, slackened off the lock nut and nipped up the ball joint. No play at all so job done.
Thanks chaps
K


You did put a pin back in to stop it unwinding ?

steve
Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at
Top
Post Reply

Return to “Car Related Discussion”

Who is online

Users browsing this forum: No registered users and 20 guests